[RECOVERY] Philz Touch Recovery 6.57.9 (17.09.2014) [END OF LIFE]

Hätte mich auch gewundert. Zählt ja eh nur der Inhalt des Ordners und nach MD5 Check sollte es losgehen.

Sent with my NEXUS 5 from outer space

Neue Version 6.15.4 verfügbar.

Changelog:

Zitat

6.15.3 (13.02.2014)
- update superSU to 1.93
- sync sources
- fix recovery reboot command (adb and shell) by adding the init sys.powerctl property control
- merge "Fix mkfs.f2fs calling in roots"
- merge "Fix mass storage in recovery"
- fix display current path when navigating backward in folders
- Nandroid Simple Logging: toggle logging of file names during nandroid to keep screen progress while speed up nandroid operations for some devices
- increase NICE_INTERVAL to 300 msec (faster backup/restore on some devices)
- hide unused settings in Nandroid Settings menu (if we disable all progress on screen, hide non valid options)
- re-order nandroid settings menu
- add a toggle for fall back to pre-built update-binary to permit use of older update-binary in zip packages (doesn't persist on reboot).
this will fix the assert errors due to outdate update-binary. It could still be affected by assert error on device name getprop. However, that one is easier to fix by end users by editing updater-script. This is a workaround. The best is to hammer your ROM cooker to update his scripts and binaries
- setting for signature check toggle on zip updates will be now saved on reboot
- Aroma File Manager: mount vold managed volumes on launch from recovery
- Free Browse Mode: make it possible to install from any custom path even ramdisk
- Free browse mode: fix exceptions when setting up custom path
- Free browse mode: mount known volumes during setup
- Free browse mode: better handling of /data/media devices
- Free Browse Mode: mount vold managed volumes when navigating in
- HTC One variants (m7): fix charger
- HTC Evo 4G LTE (jewel): fix charger
- HTC Evo 4G LTE (jewel): update to new Sense 5 partition layout (/data/media)
- HTC Evo 4G LTE (jewel): use exfat modules for much faster backup speed to exfat cards
- New: Moto G variants (falcon): xt1028 xt1031 xt1032 xt1033 xt1034
- New: Moto G Google Play Edition (falcon_gpe)
- New: Galaxy Note 8.0 LTE (n5120) support
- New: HP Touch (tenderloin), no touch
- fix potential logging issues
- fix compiler warnings
- clean up code and misc fixes

Alles anzeigen

Neue Version 6.19.3 verfügbar.

Zitat

- fix compiling for QCOM devices when using a prebuilt kernel with TARGET_PREBUILT_KERNEL
- galaxysmtd: remove ntfs-3g drivers to fit partition size

Neue Vesion 6.19.6 verfügbar.

Zitat

- loki: fix auto loki was broken and clean up sources
- hammerhead: add efs backup/restore
- m7 variants: fix charger in off mode
- jewel: fix no fstab!

Und 6.19.7 verfügbar. Noch kein Changelog.

Zitat

6.20.6 (12.03.2014)
- add md5 sum calculation and toggle verification during install of zip files
- hammerhead: fix efs backup (derp)
- loki: use new loki_tool multi bin sources
- add missing vkeys for 240 width
- many bug fixes and code cleanups
- libtouch_gui 1.04

Alles anzeigen

Und noch eins hinterher:

Zitat

6.21.2 (14.03.2014)
- add progress bar while reading zip file to compute md5 check
- add color printing during md5sum checks
- (derp) fix color code printing on md5 check disappears after 5 sec (ui_wait_key() screen refresh)
- md5sum check potential bug fixes and optimizations
- libtouch_gui 1.05

Neue Version online

Zitat

Changes between 6.21.2 and 6.22.7

-Qualcomm screenshot (fb2png) functionality added
- USB OTG install zip (black screen) Bug fixed

Sent with my NEXUS 5 from outer space

Neue Version online!

Zitat

6.23.7 (25.03.2014)
- cherry-pick @mdmower patches to legacy props init: better error checking to avoid segfaulting
- really hammer lazy developers

Ach? Meine lieblings recovery ist auch in diesem forum anwesend. Sehr schön, gleich abonnieren :). Thx @soulfly ;)...

Gesendet von meinem Nexus 5

Neue Version Online!

Zitat

6.26.1 (09.04.2014)
- New: Note 10.1 2014 3G - SM-P601 (lt0wifiue)
- New: LG Optimus L7 P700 (p700) by @ali.filth
- New: Galaxy Grand Quatro (i8552) by @ali.filth
- New: HTC One mini (m4)
- fb2png: better error logging

Neue Version Online!

Zitat

6.26.6 (14.04.2014)
- m7 unified for m7ul, m7att and m7tmo
- CWM 6.0.4.8
- merge support for native dual boot devices
- sync sources

Die zip in deinem Mirror scheint kaputt zu sein. Ich habe mehrfach versucht zu flashen. Immer der kaputte Droide.....

Gesendet von meinem Nexus 5 mit Tapatalk

Ab und zu klappt das mit dem Upload nicht richtig. Lade sie dir am besten von der offiziellen Seite.

Werde es heute Abend nochmal uploaden.

Auf der offiziellen war die noch nicht...

Gesendet von meinem Nexus 5 mit Tapatalk

Der Link auf xda ging.

Gesendet von meinem Nexus 5 mit Tapatalk

So habe mal den Link angepasst und Dateien neu hochgeladen. Sollte jetzt wieder passen.

send with my Nexus 5 from outer space

Neue Version online!

Zitat

6.29.2 (26.04.2014)
- fix potential bug when verifying root and recovery state on exit
- merge "Fix verify_root_and_recovery menu selections":
- hide the Go Back button from confirm menu
- merge "Prohibit mounting/formatting swap partitions in recovery"
- add minitar binary to /sbin instead of busybox tar
- minitar: enable more options, enable long options, fix selinux backup/restore, enhance GNU tar compatibility
- revert RECOVERY_NEED_SELINUX_FIX patch
- enable seamless backup/restore selinux context using minitar binary
- TWRP mode: support backup/restore of selinux context
- libtouch_gui 1.19

Alles anzeigen

Neue Version online. Es sollte mit der neuen Version unbedingt ein neues Backup gemacht werden. Mit der alten Version könnte es da Probleme geben.

Zitat

Can everyone who updated to 6.29.2 please update to 6.30.1 immediately?

Quote:
Bug Fix version 6.30.1

- fix restore of /data: revert to busybox tar and external selinux backup
It's not "fatal" but the integrity of any backup done in the previous version is in question.It would be best to update now and backup

Neue Version online!
Große Änderungen also macht Backups vorher und nachher.

Zitat

6.43.4 (01.06.2014)

- f2fs: recreate /etc/fstab after ext4/f2fs conversion for proper use of system mount command
- f2fs: fix nandroid restore to f2fs partitions
- f2fs: support format extra storage to f2fs (vold patch needed)
- f2fs: support switching between f2fs/ext4 (needs f2fs in kernel modules), thanks @KumaJaya
- f2fs: reload volume table after f2fs/ext4 conversion (no reboot needed after conversion)
- f2fs: do not format whole /data when not expected on /data/media devices
- f2fs: allow /data f2fs/ext4 conversion for non data_media devices
- f2fs: compile with prebuilt AOSP kernel as provided by @dennes544 - thanks!!!
- allow ext4 f2fs backup data migration in nandroid
- nandroid backup: fix 'media' exception
- use libtar as default for backup/restore
- Preserve recovery settings after a wipe
- fix save/restore settings menu label
- create /data/media directory after internal storage is wiped
- fix text print colour could persist after md5 check

F2FS:

What is it? - Flash-Friendly File System. designed by Samsung to be used spcifically on Flash media. Can increase Read / write speeds, increasing the overall performance of your phone.
Where to use it? - Since not many read / writes happen anywhere except /data, it's best to use it only on the /data partition (including /sdcard)
Do I need anything special? - Yes, you need an F2FS supported kernel
Can you recommend an AOSP Kernel? - Yes, use the AOSP/CAF kernels created by @dennes544 here. If you need something a bit more custom, flash ElementalX afterwards
Any other kernels that work? - I can't say I have tested them all. So far, I haven't managed to get Faux to work. I have used a custom version of Franco however and that worked fine (see link in thread above). I'm not really here to recommend / catalogue kernels though
Any further advice? - It depends on the kernel if it supports other partitions to be formatted as f2fs. For example, some may not allow /system to be formatted as f2fs - but this is not much use anyway, o please stick to just /data and /sdcard
Do I need to keep swapping between F2FS Philz and Standard Philz? - No, it is all one kernel. No need to flash different ones.
How do I use this? - See below

Here are the steps:
- Ensure you have an F2FS kernel (put it on your sdcard now) or have the .img ready on your computer
- Take a full Nandroid backup
- backup your ENTIRE /sdcard to PC (adb pull is as good as the rest - and also a good test that you know what you're doing)
- Flash the updated recovery
- Go to "mounts and storage"
- Press "toggle f2fs ext4 migration"
- Press "format /data and /data/media (/sdcard)"
- Select f2fs and "Yes" - Your /data and /sdcard are now blank
- adb push your clockworkmod folder back to /sdcard (and f2fs kernel if you're using a zip) - You may need to mkdir /data/media/0 as 0 *may be missing
- Nandroid restore your /data partition
- Flash your F2FS kernel
- Copy sdcard data back, using MTP in Android is best

Notes:
Please note, the migration toggle is disabled again as soon as you leave that menu. The format options will format to whatever each partition is already formatted to whilst the toggle is disabled. So if you previously formatted to f2fs and then reboot recovery and format again, it will continue to format to f2fs until you enable migration and choose the opposite option (ext4).
Also, whilst migration is enabled, you willbe prompted which fs to format to; ext4 formats to ext4, f2fs to f2sf and default to whatever it is already formatted to.

Alles anzeigen